TOSS Custom Impulse Heat Seal Jaw Bar End Caps 360˚ view
TOSS heat seal jaw bar ends tensioning and electrical connection to the heatseal band is accomplished by the TOSS jaw end blocks. These jaw end blocks are designed to interface with the jaw bar at its ends, are molded of temperature resistant polymer, and have tensioning springs built in. They are attached by a threaded screw that is an integral part of the jaw end block assembly.
CLICK on the buttons below to open larger 360 view image frame.
An important part of the jaw end block design is an alignment pin that holds the heatseal band in position, facilitates band attachment, and assures that the band is properly positioned and tensioned.
If you have any questions as to which component you need contact TOSS for technical support.
(610) 759-8883 or email us at info@tossheatseal.com.